PROJECT PURPOSE
Automatic Turret-Based Test & Finish Handler is designed for integrated circuits testing and handling with package sizes more than 5×5 mm and application package types SOIC, TSSOP, MSOP, QFN, DFN, etc.
PROJECT FEATURES
- High throughput – not less than 40,000 UPH @ 40 ms test time
- Latest precise high speed turret DDR motorizing system with 26 pick heads
- Individual up/down driving mechanism further allowing high speed up/down pick head motion
- Onloading/Offloading System – vibratory bowl, plastic tube loader, metal tray loader, JEDEC tray loader, tape-and-reel, etc.
- iTechnologies offer easy machine setup & best package protection (optional)
- iContact for force control during test on large ultra thin QFN/LGA packages and protecting from die or package crack
- Up to 16 parallel test sites supported
- Full 6-sided vision inspection
- Auto Unit Replacement
- Post-Seal inspection (optional)
- Auto Reel Changer (optional).
SYSTEM SPECIFICATIONS
| System Capability | |
|---|---|
| PARAMETER | VALUE |
| Throughput | 40,000+ UPH * @ 40 ms test time |
| Number of pick heads | 26 |
| Тesting stations Standard | 4 |
| Тesting stations Option | Мах. 5 (SOICI / Мах. 16 (QFN) |
| Testing environment | Ambient temperature |
| Tester interface | TTL |
| Contact methods | Standard / Kelvin contact |
| Application Package Types | |
| PARAMETER | VALUE |
| Package size | > 5 x 5 mm2 |
| Application | SOIC, TSSOP, MSOP, QFN, DFN, SMA etc. |
| Onloading System | |
| PARAMETER | VALUE |
| Vibratory bowl | Plastic tube looder |
| Metal tray loader | JEDEC tray looder |
| Offloading System | |
| PARAMETER | VALUE |
| Standard | Good sorting bin х 1; Multi reject bin with 8 sorting bins |
| Option | Tape-and-Reel х 1 (max. 2) |
| Vision lnspection System | |
| Mark / surface inspection (optional) | |
| 2D / 2.5D lead / 5-side inspection | |
| ln-pocket inspection | |
| Facilities Required | |
| PARAMETER | VALUE |
| Voltage | 110/200/220/240 VAC (single phosel) |
| Frequency | 50/60 Hz (pre-set at factory) |
| Power consumption | 3000 W |
| No. of power cord | 1 |
| Compressed air | Min. 4 bar |
| Flow rote | 150 LPM@ 4 bar |
| No. of inlet | 1 |
| Vacuum requirements: Flow | 17 mЗ |
| Pressure | – 60 kpo |
| Working enviroment:Тemperature | 20 – 30°C |
| Humidity | 30 – 70% RH |
| Dimensions (W х D х Н) | 2000 х 1250 х 1890 mm3 |
| Dimensions & Weight | |
| PARAMETER | VALUE |
| Dimensions (W х D х Н) | 2000 х 1250 х 1890 mm3 |
| Weight | 2200 – 3300 lbs (1000 – 1500 kg) |
